Welcome to Southern Powder Coating
At SPC, we take pride in offering only the highest quality finishes to our customers. All of our preparation and coating is done by hand to ensure close attention to detail.
Why powder coat? There are many advantages to powder coating:
*Absence of solvents
*Applied in one coat
*Resistant to chipping,scratching,abrasion and bending
*Cleaner working conditions
*Virtually no atmospheric pollution, very little or 0% volatile organic compounds (VOC) - due to the fact these are 100% solids
*Safety in use and on storage, low fire hazard
*No viscosity adjustments
Powder Coating is basically a dry paint. Instead of being dissolved in a liquid medium(such as solvent), powder is applied in its dry form, finer than ground pepper, courser than flour, directly to the surface to be coated. Powder Coatings are electrostatically applied to parts using electrostatic spray. The part to be powder coated is grounded and the powder is charged, this attracts the powder to the part, much like a magnet attracts steel. This charge holds the powder to the part and the part is then cured (baked) in an oven.
Contact us:
Monday to Friday 8A.M. to 4P.M.
**BY APPOINTMENTS ONLY**
(423)241-9712 - Fred
(423)241-9711 - Jamie
(423)241-0499 - Tyler
email: jamie@southernpowderco.com
*Absence of solvents
*Applied in one coat
*Resistant to chipping,scratching,abrasion and bending
*Cleaner working conditions
*Virtually no atmospheric pollution, very little or 0% volatile organic compounds (VOC) - due to the fact these are 100% solids
*Safety in use and on storage, low fire hazard
*No viscosity adjustments
Powder Coating is basically a dry paint. Instead of being dissolved in a liquid medium(such as solvent), powder is applied in its dry form, finer than ground pepper, courser than flour, directly to the surface to be coated. Powder Coatings are electrostatically applied to parts using electrostatic spray. The part to be powder coated is grounded and the powder is charged, this attracts the powder to the part, much like a magnet attracts steel. This charge holds the powder to the part and the part is then cured (baked) in an oven.
Contact us:
Monday to Friday 8A.M. to 4P.M.
**BY APPOINTMENTS ONLY**
(423)241-9712 - Fred
(423)241-9711 - Jamie
(423)241-0499 - Tyler
email: jamie@southernpowderco.com